Class StackPane

All Implemented Interfaces:
LayoutMeasurable, LayoutMeasurableMixin, HasBackgroundProperty, HasBlendModeProperty, HasBorderProperty, HasClipProperty, HasEffectProperty, HasHeightProperty, HasLayoutXProperty, HasLayoutYProperty, HasManagedProperty, HasMaxHeightProperty, HasMaxWidthProperty, HasMinHeightProperty, HasMinWidthProperty, HasMouseTransparentProperty, HasOnMouseClickedProperty, HasOpacityProperty, HasPaddingProperty, HasParentProperty, HasPrefHeightProperty, HasPrefWidthProperty, HasSnapToPixelProperty, HasVisibleProperty, HasWidthProperty, Styleable, EventTarget, INode, PreferenceResizableNode

public class StackPane extends Pane
StackPane lays out its children in a back-to-front stack.

The z-order of the children is defined by the order of the children list with the 0th child being the bottom and last child on top. If a border and/or padding have been set, the children will be laid out within those insets.

The stackpane will attempt to resize each child to fill its content area. If the child could not be sized to fill the stackpane (either because it was not resizable or its max size prevented it) then it will be aligned within the area using the alignment property, which defaults to Pos.CENTER.

StackPane example:


     StackPane stack = new StackPane();
     stack.getChildren().addAll(new Rectangle(100,100,Color.BLUE), new Label("Go!"));
 

StackPane lays out each managed child regardless of the child's visible property value; unmanaged children are ignored.

StackPane may be styled with backgrounds and borders using CSS. See Region for details.

Resizable Range

A stackpane's parent will resize the stackpane within the stackpane's resizable range during layout. By default the stackpane computes this range based on its content as outlined in the table below.

StackPane Resize Table
widthheight
minimum left/right insets plus the largest of the children's min widths. top/bottom insets plus the largest of the children's min heights.
preferred left/right insets plus the largest of the children's pref widths. top/bottom insets plus the largest of the children's pref heights.
maximum Double.MAX_VALUEDouble.MAX_VALUE

A stackpane's unbounded maximum width and height are an indication to the parent that it may be resized beyond its preferred size to fill whatever space is assigned to it.

StackPane provides properties for setting the size range directly. These properties default to the sentinel value USE_COMPUTED_SIZE, however the application may set them to other values as needed:

     // ensure stackpane is never resized beyond it's preferred size
     stackpane.setMaxSize(Region.USE_PREF_SIZE, Region.USE_PREF_SIZE);
 
Applications may restore the computed values by setting these properties back to USE_COMPUTED_SIZE.

StackPane does not clip its content by default, so it is possible that children's bounds may extend outside its own bounds if a child's min size prevents it from being fit within the stackpane.

Optional Layout Constraints

An application may set constraints on individual children to customize StackPane's layout. For each constraint, StackPane provides a static method for setting it on the child.

StackPane Constraint Table
ConstraintTypeDescription
alignmentjavafx.geometry.PosThe alignment of the child within the stackpane.
marginjavafx.geometry.InsetsMargin space around the outside of the child.

Examples:

     // Align the title Label at the bottom-center of the stackpane
     Label title = new Label();
     StackPane.setAlignment(title, Pos.BOTTOM_CENTER);
     stackpane.getChildren.addAll(new ImageView(...), title);

     // Create an 8 pixel margin around a listview in the stackpane
     ListView list = new ListView();
     StackPane.setMargin(list, new Insets(8,8,8,8);
     stackpane.getChildren().add(list);
 
Since:
JavaFX 2.0
  • Property Details

  • Constructor Details

    • StackPane

      public StackPane()
      Creates a StackPane layout with default CENTER alignment.
    • StackPane

      public StackPane(Node... children)
      Creates a StackPane layout with default CENTER alignment.
      Parameters:
      children - The initial set of children for this pane.
      Since:
      JavaFX 8.0
  • Method Details

    • setAlignment

      public static void setAlignment(Node child, Pos value)
      Sets the alignment for the child when contained by a stackpane. If set, will override the stackpane's default alignment. Setting the value to null will remove the constraint.
      Parameters:
      child - the child node of a stackpane
      value - the alignment position for the child
    • getAlignment

      public static Pos getAlignment(Node child)
      Returns the child's alignment constraint if set.
      Parameters:
      child - the child node of a stackpane
      Returns:
      the alignment position for the child or null if no alignment was set
    • setMargin

      public static void setMargin(Node child, Insets value)
      Sets the margin for the child when contained by a stackpane. If set, the stackpane will layout the child with the margin space around it. Setting the value to null will remove the constraint.
      Parameters:
      child - the child node of a stackpane
      value - the margin of space around the child
    • getMargin

      public static Insets getMargin(Node child)
      Returns the child's margin constraints if set.
      Parameters:
      child - the child node of a stackpane
      Returns:
      the margin for the child or null if no margin was set
    • clearConstraints

      public static void clearConstraints(Node child)
      Removes all stackpane constraints from the child node.
      Parameters:
      child - the child node
    • alignmentProperty

      public final ObjectProperty<Pos> alignmentProperty()
      The default alignment of children within the stackpane's width and height. This may be overridden on individual children by setting the child's alignment constraint.
      Returns:
      the alignment of children within this stackpane
      See Also:
    • setAlignment

      public final void setAlignment(Pos value)
      Sets the value of the alignment property.
      Property description:
      The default alignment of children within the stackpane's width and height. This may be overridden on individual children by setting the child's alignment constraint.
      Parameters:
      value - the value for the alignment property
      See Also:
    • getAlignment

      public final Pos getAlignment()
      Gets the value of the alignment property.
      Property description:
      The default alignment of children within the stackpane's width and height. This may be overridden on individual children by setting the child's alignment constraint.
      Returns:
      the value of the alignment property
      See Also:
    • getContentBias

      public Orientation getContentBias()
      Returns:
      the first non-null contentBias of its managed children or null if no managed children have a content bias.
    • computeMinWidth

      protected double computeMinWidth(double height)
      Description copied from class: Region
      Computes the minimum width of this region. Returns the sum of the left and right insets by default. region subclasses should override this method to return an appropriate value based on their content and layout strategy. If the subclass doesn't have a VERTICAL content bias, then the height parameter can be ignored.
      Overrides:
      computeMinWidth in class Region
      Parameters:
      height - the height that should be used if min width depends on it
      Returns:
      the computed minimum width of this region
    • computeMinHeight

      protected double computeMinHeight(double width)
      Description copied from class: Region
      Computes the minimum height of this region. Returns the sum of the top and bottom insets by default. Region subclasses should override this method to return an appropriate value based on their content and layout strategy. If the subclass doesn't have a HORIZONTAL content bias, then the width parameter can be ignored.
      Overrides:
      computeMinHeight in class Region
      Parameters:
      width - the width that should be used if min height depends on it
      Returns:
      the computed minimum height for this region
    • computePrefWidth

      protected double computePrefWidth(double height)
      Description copied from class: Region
      Computes the preferred width of this region for the given height. Region subclasses should override this method to return an appropriate value based on their content and layout strategy. If the subclass doesn't have a VERTICAL content bias, then the height parameter can be ignored.
      Overrides:
      computePrefWidth in class Region
      Parameters:
      height - the height that should be used if preferred width depends on it
      Returns:
      the computed preferred width for this region
    • computePrefHeight

      protected double computePrefHeight(double width)
      Description copied from class: Region
      Computes the preferred height of this region for the given width; Region subclasses should override this method to return an appropriate value based on their content and layout strategy. If the subclass doesn't have a HORIZONTAL content bias, then the width parameter can be ignored.
      Overrides:
      computePrefHeight in class Region
      Parameters:
      width - the width that should be used if preferred height depends on it
      Returns:
      the computed preferred height for this region
    • requestLayout

      public void requestLayout()
      Description copied from class: Parent
      Requests a layout pass to be performed before the next scene is rendered. This is batched up asynchronously to happen once per "pulse", or frame of animation.

      If this parent is either a layout root or unmanaged, then it will be added directly to the scene's dirty layout list, otherwise requestParentLayout will be invoked.

      Overrides:
      requestLayout in class Parent
    • layoutChildren

      protected void layoutChildren()
      Description copied from class: Parent
      Invoked during the layout pass to layout the children in this Parent. By default it will only set the size of managed, resizable content to their preferred sizes and does not do any node positioning.

      Subclasses should override this function to layout content as needed.

      Overrides:
      layoutChildren in class Parent